Temperature Control Demonstration Unit- Engineering Lab Training Systems

Technical Description This training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of temperature control. All components are clearly laid out on a vertical front panel. The large-format process diagram provides an aid to understanding.  The system comprises two water circuits. In the secondary circuit fresh water is heated up by a heat exchanger. The temperature is measured by an electronic temperature transducer at the fresh water outlet. The outlet temperature of the fresh water is regulated by the flow rate of warm water in the primary circuit. The primary circuit comprises an electrically heated tank, a pump and an electromagnetic proportional valve as the actuator. Both circuits include variable-area flowmeters. The controller used is a state-of-the-art digital industrial controller. A ball valve in the secondary circuit enables defined disturbance variables to be generated. The controlled variable X and the manipulating variable Y can be tapped as analogue signals at lab jacks. This enables external recording equipment, such as a plotter or an oscilloscope, to be connected.   An instrumentation and control software with interface module (USB) is available as an accessory. This enables the key process variables to be represented, and control functions executed. The well-structured instructional material outlines the technological fundamentals and provides a step-by-step guide through the experiments.