Bottling station

•    Optoelectronic diffuse sensor with background suppression, teach-in function, max. switching frequency 1,000 Hz, range 25 - 100 mm
•    Pneumatic separator, stroke 20 mm, secured against rotation by means of twin pistons
•    Conveyor with 24 V DC motor, for workpieces with a diameter of 40 mm
•    2/2-way dosing valve, 24 V, Kv value 0.3 m3/h, operating pressure 0 - 3 bar
•    Ultrasound sensor, Smin 50 mm, Smax 300 mm, analogue output signal 0 - 10 V (programmable)
•    Tank with downwards discharge: Tank capacity 10 litres, material polycarbonate
•    Tank with downwards discharge: Tank capacity 3 litres, material polycarbonate
•    Tank overflow with safety circuit
•    24 V/26 W centrifugal pump, regulated 0 - 24 V, max. system pressure 2.5 bar
•    Terminal board with plug connection and signal converter
•    One-piece aluminium profile plate (700 x 700 mm) with 50 mm slot width, slots on both sides
•    Capacitive sensors for level detection, Sn 2 - 8 mm
•    Infrared receiver for a release message sent by a following station equipped with an infrared transmitter
•    Mounting frame for power supply
•    Infrared transmitter for sending a release message to a previous station equipped with an infrared receiver
•    Terminal block with eight outputs, eight inputs and connection for 24 V DC. Amalgamates all digital signals and forwards these for connection to a controller via an IEEE 488/24-pin compatible plug connection. The signal states are shown via LED displays for ease of troubleshooting
•    Terminal block for analogue signals. Amalgamates all analogue signals and forwards these for connection to a controller via a Sub-D 15-pin compatible plug connection
•    Manual and CD-ROM with sample programs for various plc systems
The station is assembled, wired, connected and tested.
The station can be operated individually or combined with three further stations by simply pushing them together. The overall functionality is guaranteed when using the sample programs supplied together with the control desks, provided no program modifications are made or additional connecting cables used.
Technical data:
•    Operating pressure 600 kPa (6 bar)
•    Power supply 24 V DC
•    Digital inputs: 7
•    Digital outputs: 6
•    Analogue input: 1
•    Analogue output: 1

Complete with movable trolley with approximate below dimensions:

Appropriate through-holes in the side and rear panels enable orderly routing of cables. The front side is equipped with mountings for the control panel.
The trolley is supplied complete with castors.
Stable, powder-coated, sheet-steel
•    Height (incl. castors, to bottom edge of profile plate): 750 mm
•    Width: 700 mm
•    Depth: 700 mm