Set for Control of the Power Factor Improvement

TRAINING PROGRAM
The training concerns:
– measurement of the active, reactive and apparent power
– instruments for measurement of the different forms of electric
power
– needs and advantages of the power factor correction
– power factor correction with capacitive batteries with manual
and automatic insertion
– power factor correction with synchronous compensator
The user on which the power factor is to be optimized is obtained
with the help of resistive or inductive loads
TECHNICAL SPECIFICATIONS
Set of modules for the study and experiments on power
factor improvement circuits
1 Module: 1 electronic gear case for three-step
power factor improvement
1 Modules : 1 2-mF power factor improvement
capacitive three-phase battery, 1 4-mF power factor
improvement capacitive three-phase battery, discharge
resistors, inductances for limiting the transitory at the insertion
1 Module : 5 panel fuse-holder with sectionable hoses 4 / 6 A
1 Module : 1 transformer 115-230 / 12-24 V 50-60 Hz 72 VA
3 Modules : 1 electromagnetic counter for industrial
uses, 24-Vac coil
1 Module : Digital analyzer for electrical power to be
used with balanced or unbalanced systems with or without
neutral. Good to be used for measurement of voltages,
currents, active, reactive and apparent powers, peaks of
maximum active, reactive or apparent power, active and
reactive energy counting, cogeneration counting. The
analyzer is complete with two programmable relays with
minimum or maximum alarm functions between the
measured parameters. The analyzer is complete with
interface RS485 for acquisition of the parameters with a
personal computer  

Electrical characteristics
• General control of electromagnetic kind with key-locked
switch, high sensitivity T.M.C.B. and emergency pushbutton
• Three-phase and single-phase service line 400/230 V –
10 A, protected with T.M.C.B 10A, safety terminals
• Fixed line 220 Vdc – 3 A, with rectified and protected
voltage, safety terminals
• Variable three-phase line 0:430 Vac – 3 A / 0:500 Vdc –
4 A, T.M.C.B./fuse protection and separate instruments for
measurement of the output dc/ac voltage, safety terminals
• Fixed stabilized line 6/12/24 Vdc – 2A, electronic
protection against short-circuits and overloads
Dimensions and weight
525x500x600 mm – 50 kg
POWER SUPPLY
3x400 V / N / PE – 60 Hz
(3x220V/ N / PE or other voltages upon request)
Max. absorption: 6 kVA