Training Equipment in Industrial Pneumatics

The set up comprises a Mobile Lab. Trolley, set of Pneumatic  Components and a Comprehensive Manual.  Mobile lab. trolley  
Approx. dim: 1210mm(L) x 750mm(W) x 1450mm(H).  
The trolley must have two (2) circuit building plugboards  (approx. size) 1100mm x 700mm, each with mounting holes must be  fitted with rubber component retaining grommets.  
The boards must be powder coated 16swg steel (at least), with  2mm shrouded sockets for electrical distribution built into the  plugboard.  
There must be two (2) lockable equipment storage cabinets, each  consists of five (5) drawers (depths are 1 x 66mm, 2 x 85mm, 1 x  130mm, 1 x 200mm ‐ approx. sizes). Cabinets and all drawers to be  steel, powder coated construction including drawer fronts.
The  trolley must be mounted on four (4) heavy duty, rubber tyred castors  two (2) of which are swivel and lockable.  
The trolley must be mounted on four (4) heavy duty castors  two(2) of which are swivel and lockable.  Set of Components ‐ Pneumatics, comprises:‐  
1 x Air service unit (filter/pressure regulator) with ON/OFF valve  and pressure gauge  
1 x 6‐way manifold with check fittings (airflow blocked on  removal of tubing)  
1 x Single Acting Cylinder ‐ 16mm diameter, 50mm stroke  
2 x Double Acting Cylinder ‐ 16mm diameter, 100mm stroke
with magnetic piston for contactless sensing  
4 x 3/2 way Push Button Valve (2 baseplates each with 2  valves)  
1 x 3/2 way Toggle Lever Valve  
1 x Visual Indicator  
1 x 5/2 way Toggle Lever Valve  
1 x 5/2 way Pilot/spring Valve  
3 x 5/2 way Pilot/Pilot Valve  
1 x 5/3 way Pilot/Pilot Valve with Closed centre  
2 x 3/2 way Roller Lever Valve (for instroke operation) ‐  mounted on adjustable baseplate (must have both vertical and  horizontal adjustment).  
2 x 3/2 way Roller Lever Valve (for outstroke operation) ‐  mounted on adjustable baseplate (must have both vertical and  horizontal adjustment).  
1 x 3/2 way Adjustable Timer valve  
2 x Throttle / Check Valve (on one baseplate)  
1 x Quick Exhaust Valve  
4 x Shuttle Valve / OR Gate (2 baseplates each with 2 valves)  
2 x Two Pressure Valve / AND Gate (on one baseplate)  
1 x Stainless Steel Air Reservoir  
1 x Pressure Gauge  
10 x Push‐fit Tee  
10 x Push‐fit Plug   
15 metres 4mm o.d. polyurethane tubing  
5 metres 6mm o.d. polyurethane tubing  
All pneumatic components should mount on four (4) pin plug‐in  baseplate, complete ready to use with pneumatic connections for  4mm o.d. tubing (supplied) and 2mm shrouded plugs / sockets for  electrical connections. All threaded exhaust ports to be fitted with  silencers.  Manual:  
A comprhesive set of Exercises / Solutions