Drop Infusion Pump

Technical Specifications Infusion Overall Accuracy +/- 1 % Setting Modes Flow rate only, flow rate + volume target, time + volume target Flow rate ranges 0 -300 drops/min or 0 -300 ml/hr. Infusion volume limits 0 -60000 drops or 0 -10000 ml Time range 0 -99:00 hrs KVO rate 1 to 5 % of selected infusion rate but min. 1 drop/ min or 1 ml/hr Mechanical Pumping Mechanism Linear Peristaltic Drop Sensor External Air Bubble Detector Ultrasonic Adjustable 20- 150µ1 15, 20, 40, 60 drops/cc. Set type Facility to add four customized sets as per user's choice. Alarms Run & Mains. No mains, Very low battery, Low battery, Sensor error, Low flow, High flow, Door open, Near End, End of infusion, KVO, Air in line**, System error. Special Features Free Flow Protection A unique lever mechanism protects from free flow in case of accidental door opening. Digital Processing of Drop Sensor Signal Digital processing of drop sensor signals allows you to the change the infusion parameters without the need for infusion interruption. Adjustable air in line alarm threshold * The size of air bubble to be detected can be set in the range of 20 to 150µ1 Flow Rate & Volume Unit selection Option to select Flow Rate Unit in terms of drop/mill or ml/hr & Volume Unit in terms of drops or m1. Power External power supply AC Input range170 -270 VAC, Frequency 50 -60 Hz 12 Volts, l Amp DC output Supply Power Consumption 12 Watts max. Build in battery 8.4 V, 2.1 AHr Ni -MH battery for increased durability. Continuous operation for about 4.5 hrs. at an operating rate of 20 drops/mill or 20 ml/hr with assign I. V. Set under standard conditions. Classification Class II, IPX1 (Drip Proof) Operating Conditions Ambient Temperature 05 to 40° C Relative Humidity 20 to 90 % (no condensation) Atmospheric 70 to 106 kPa pressure