CAT NO: DIDACTICNLE-Export-031046
A Cyclone Separator is a vertical
cylinder with the inlet stream introduced tangentially near the top,
giving the suspension a spinning rotation in the cylinder. The
centrifugal force acting on the particles tends to throw them radially
to the sides of the cylinder as they spiral downward to a conical bottom
where they are removed. A collector is fitted at the bottom & the
induced draft blower is used to create the air stream. The classified
air leaves the cyclone through a pipe extended down into the cyclone
& passes through blower delivery side fitted with fine screen cloth
bag to avoid dust expansion in the laboratory.
The setup consists of I.D. blower connected to discharge side of
Cyclone Separator. A flow meter with manometer is provided to measure
the flow rate of air. Pressure drop in the Cyclone is measured by water
manometer. Solids are collected in the collector fixed at the bottom.
The set-up is complete with flow
To study the performance of a given Cyclone.
To study the effect of inlet gas velocity on overall efficiency
Utilities Required :
Material for Feed.
Electric Supply : Single phase, 220 V AC, 1 kW.
Floor Area 2 m x 1 m.
Technical Details :
: Material Stainless Steel, Dia 100mm
Solid Discharge Silo.
: Material Stainless Steel, suitable capacity with discharge control valve.
: ID Fan Blower with 1 HP provided motor
Air flow measurement
: Flow meter with manometer.
: Transparent PVC container fixed with Cyclone.
Fine Dust Collector
: Bag of Nylon cloth fixed on exit of air.
Control panel Comprises of:
Standard make On/Off switch, Mains Indicator etc.
: An ENGLISH instruction manual will be provided along with the Apparatus
A good quality painted rigid MS Structure is provided to support all the parts
Mechanical Testing Lab equipment manufacturers,exporters and Mechanical Testing Lab suppliers