Wifley Table

Wifley Table The present set up is designed to conduct the separation test. It consists of a flat table which is inclined at an angle of about 3o to the horizontal. Running approximately parallel to the top edge is a series of slats, or riffles as they are turned, about 6 mm in height. The material to be separated is fed on to one of the top corners and a reciprocating motion consisting of a forward direction and return stroke, causes it to move across the table. The particles also tend to move downwards under the combined action of gravity and of a stream of the water which is introduced along the top edge, but are opposed by the riffles behind which the smaller particles as the cleaner material tend to be held. Thus, the large particles and the less dense material are carried downwards, and the remainder is carried parallel to the riffles. Experimentation: To demonstrate the working of wilfley table and to separate the different sized particles Utilities Required : Electricity Supply : Single Phase, 220 VAC Material to be separated. Technical Details : Wilfley Table Size : 800mm x 400mm Motor : ½ HP motor Control Panel comprising of standard make on/off switch, mains indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus The whole set up is mounted on a power coated rigid M.S. frame Structure

Mechanical Testing Lab equipment manufacturers,exporters and Mechanical Testing Lab suppliers