CAT NO: DIDACTICNLE-Export-125019
CNC Lathe Trainer.
CNC Lathe Trainer.
Servo is a servo motor based CNC Trainer machine. We have successfully implemented Servo technology in our Trainer machines. Now it is possible to provide hands on experience to students to most of the machine tool industry norms. Rapid travel of 10,000 mm/min and Fanuc / Siemens emulated keyboard imparts necessary industrial grade machine experience to students.
Complete independence from computer (No I/O card used) prevents this machine from any issues related with electrical supply (Noise and Spikes). Down time of PLC based machines is 90% less as compared to other computer (I/O Card) based machines.
Also, machines to be operated remotely. Hence problem
detection and eventual solution can be attained within minutes.
|Bed Type||Flat / 45 Degrees Slant|
|Keyboard Type||Fanuc Emulated / Manual|
|Chuck Size||150 mm (Dia)|
|Maximum Turning Diameter||100 mm|
|Maximum Turning Length||250 mm|
|Center Height||150 mm|
|Swing over Cross Slide||125 mm|
|Swing Over Bed||300 mm|
|Distance between Centre||320 mm|
|Controller||with CutViewer-United Kingdom|
|Control System||PLC Based Control System|
|Operating Software||CutViewer - United Kingdom|
|Repeatability||+/- 0.005 mm|
|Spindle Motor||AC Servo|
|Spindle Motor Capacity||3.7 KW / 5 HP|
|Spindle RPM||100 to 4000 RPM with VFD|
|Spindle Nose Taper||A 2-5|
|Axis Motor and Drive||Servo Motor with Servo Drives
(Mitsubishi / Siemens)
|X Axis Travel||100 mm|
|Z Axis Travel||300 mm|
|Ball Screw X / Z||Ø25 x 5 - C3 Class|
|Programmable Feed Rate||0 to 10,000 mm/min|
|Rapid Travel||10,000 mm/min|
|Number of Stations||4 / 8|
|Tool Cross Section||12 mm x 12 mm|
|Boring Bar Size||16 mm|
|Tailstock Base Stroke||170 mm|
|Tailstock Actuation||Hydraulic/ Manual|
|Dimension in mm||1520 x 800 x 1200 mm|
|Power Supply||415V, +-2% 50 Cycles, 3 Phase|